CNG Compress Unit
Rich methane gas meets with rich gas ethane reheated by cooling heat exchanger, this steam of gas flows through the CNG compressor to increase pressure to 25Mpag, CNG product can be obtained.
The compressor skid adopts motor drive, and an ASPRO piston dynamic balance less oil lubrication type compressed natural gas processing. The drive is completely explosion-proof motor, its security level is class 1. Motor is connected to the compressor by belt wheel, and by aligns laser alignment instrument. Natural gas is cooled by the interstage air coolers. Gas collected by the downtime interstage gas collecting device will directly enters to the compressor's input pore at the next start. What’s more, there’re interstage liquid-gas separators and last stage gas scrubbing device. At compressor downtime, these devices will bring the impurities within the system to the recovery tank by gas flow. All the automatic valve drive is driven by the natural gas in the recovery tank, an external air compressor is unnecessary. The whole compressor system is installed on a steel structure, the control panel is at the side.
The pressurized CNGis filled to gas tanker by gas filling column.
CNG Decompression Unit
The 20-25MPa CNG enters to the decompression unit trough discharge column, then CNG is heated by a heater, and regulated pressure to 1.6MPa, and returns to the heat exchanger and pressure regulator again, when the pressure reaches at 0.1MPa, the CNG goes to the end user.
